D3X Bidirectional COFDM Ethernet Radio with Video
D3X is a compact wireless COFDM communication system that operates on multiple bands, offering Point-to-Point (PTP), Point-to-Multipoint (PTMP), and Mesh network capabilities. It utilizes a proprietary communication protocol and features three transparent Ethernet connections along with multiple TTL ports.
D3X operates on three separate frequency bands simultaneously, establishing a highly resilient wireless link that can overcome challenging radio frequency environments and potential jamming. Bands are available in both VHF/UHF and microwave spectrums, ranging from 300MHz to 20GHz, each with a bandwidth of 0.5 to 20MHz (Configurable per channel)
This configuration provides an aggregated TCP throughput of 120Mbps or 40Mbps per band when using 20MHz channels with QAM16 modulation.
With its three independent COFDM links, D3X is particularly well-suited for various applications, including aerial and ground robotics, across a wide range of scenarios. It is available with RF output power of 500mW to 30W (with external amplifiers), creating links with ranges of 150KM+
In addition to its robust and secure communication capabilities, D3X offers HDMI or HD-SDI video inputs and incorporates a low-latency H.265 codec, delivering high-quality video with bit rates ranging from 1 to 20Mbps. (Available 4K UHD on HDMI)
D3X operates on three separate frequency bands simultaneously, establishing a highly resilient wireless link that can overcome challenging radio frequency environments and potential jamming. Bands are available in both VHF/UHF and microwave spectrums, ranging from 300MHz to 20GHz, each with a bandwidth of 0.5 to 20MHz (Configurable per channel)
This configuration provides an aggregated TCP throughput of 120Mbps or 40Mbps per band when using 20MHz channels with QAM16 modulation.
With its three independent COFDM links, D3X is particularly well-suited for various applications, including aerial and ground robotics, across a wide range of scenarios. It is available with RF output power of 500mW to 30W (with external amplifiers), creating links with ranges of 150KM+
In addition to its robust and secure communication capabilities, D3X offers HDMI or HD-SDI video inputs and incorporates a low-latency H.265 codec, delivering high-quality video with bit rates ranging from 1 to 20Mbps. (Available 4K UHD on HDMI)
|
D3X COFDM Link for drones
|
|
D3X Features:
|
|
Frequency Range |
300-900MHz, 1.3 - 6GHz, 18-22GHz (Auto Frequency selection or manual input with 100KHz tuning steps in all bands |
Transmit Power |
20-25dBm on all bands, with optional 30dBm (1W), up to 30W with external amp |
RX Sensitivity |
300-900M: 10Mbps -103dBm；5MHz -106dBm；3MHz -108dBm 1.3-6Ghz: 10Mbps -103dBm；5MHz -106dBm；3MHz -108dBm18-22Ghz: 10Mbps -102dBm；5MHz -104dBm；3MHz -106dBm |
Channel Bandwidth |
1.4MHz/3MHz/5MHz/10MHz/20MHz |
Modulation |
QPSK/QAM16 |
Over the air Bitrate |
Up to 120Mbps (Aggregated) |
Operating Modes |
AP/STA/Repeater (Limited to 8 clients per AP for optimal performance) |
Range with 3dBi omnis |
15km+ LOS, 500 Meter+ NLOS on UHF/1400MHz |
Ethernet Port |
RJ45x3 |
UART Port |
UART(Data)*1；UART(Config)*1 |
Power Input |
7-24VDC |
Power Consumption |
6W average (25dBm per channel) |
Dimensions (bare board) |
95x65mm (95g) |
Operating Temperature |
-40 to +40C |
Config |
WEB GUI, TTL |
Video in/out |
Up to 4K UHD over HDMI, 1080p 60 over HD-SDI |
Video Codec |
H.265 HEVC, up to 20mbps |