DTM Bidirectional COFDM Ethernet Radio
Compact, multi-frequency PTP/PTMP/MESH
Wireless link based on a proprietary communications protocol with 3 transparent ethernet and multiple TTL ports.
DTM is based on the 4G LTE TDD/FDD mobile communication standard, making it exceptionally well suited for industrial and surveillance applications in challenging environments, while requiring virtually no setup and extra testing equipment. Operating in the 700-900MHz, 1.3-1.4GHz and 2.4GHz frequency bands with 500mW of output power, DTM is capable of creating wireless networks well in excess of 15KM with maximum throughput of 30MBPS. External amplifiers can also be used to extended coverage to 150KM+ LOS or 3KM+ NLOS
DTM further enhances RF flexibility by allowing users to adjust channel bandwidths between 1.4, 3, 5, 10, and 20MHz. By incorporating optional 5 or 10-watt external amplifiers, DTM can serve as an LTE Base station for municipalities, offering coverage up to 30+KM from a radio tower in a typical urban setting. DTM leverages LTE standard protocols, including AES 128 Encryption, dynamic frequency selection, and adaptive modulation. It has been specifically optimized to meet the requirements of mission-critical video applications and provides customizable Quality of Service (QoS) settings for end users.
Wireless link based on a proprietary communications protocol with 3 transparent ethernet and multiple TTL ports.
DTM is based on the 4G LTE TDD/FDD mobile communication standard, making it exceptionally well suited for industrial and surveillance applications in challenging environments, while requiring virtually no setup and extra testing equipment. Operating in the 700-900MHz, 1.3-1.4GHz and 2.4GHz frequency bands with 500mW of output power, DTM is capable of creating wireless networks well in excess of 15KM with maximum throughput of 30MBPS. External amplifiers can also be used to extended coverage to 150KM+ LOS or 3KM+ NLOS
DTM further enhances RF flexibility by allowing users to adjust channel bandwidths between 1.4, 3, 5, 10, and 20MHz. By incorporating optional 5 or 10-watt external amplifiers, DTM can serve as an LTE Base station for municipalities, offering coverage up to 30+KM from a radio tower in a typical urban setting. DTM leverages LTE standard protocols, including AES 128 Encryption, dynamic frequency selection, and adaptive modulation. It has been specifically optimized to meet the requirements of mission-critical video applications and provides customizable Quality of Service (QoS) settings for end users.
|
|
|
DTM stands out as the perfect option for various applications, such as surveillance, mobile robotics, body-worn video, and data communications, due to its compact size, built-in tools, and RF flexibility. Our radiosolutions are available in both finished boxed product and OEM PCB formats, allowing seamless integration into Robotics and surveillance platforms. JPE's COFDM technology offers unbeatable, robust, and secure communication for UGVs, UAVs, and surveillance applications worldwide, with superior Non-Line-of-Sight (NLOS) performance compared to other solutions, all while being cost-effective. With an extensive product range, from basic digital video links to advanced IP Mesh and Software Defined Radio systems, JPE has the perfect solution for every requirement.
|
|
Frequency Range |
700-950MHz, 1.3 - 1.4GHz, 2.4GHz (Auto Frequency selection or manual input with 100KHz tuning steps) |
Transmit Power |
20-25dBm on all bands |
RX Sensitivity |
700-900M: 10Mbps -103dBm；5MHz -106dBm；3MHz -108dBm 1.3-1.4G: 10Mbps -103dBm；5MHz -106dBm；3MHz -108dBm 2.4G: 10Mbps -102dBm；5MHz -104dBm；3MHz -106dBm |
Channel Bandwidth |
1.4MHz/3MHz/5MHz/10MHz/20MHz |
Modulation |
QPSK/QAM16 |
Over the air Bitrate |
Up to 30Mbps at QAM16/20MHz |
Operating Modes |
AP/STA/Repeater (Limited to 16 clients per AP for optimal performance) |
Range with 3dBi omnis |
15km+ LOS, 500 Meter+ NLOS on UHF/1400MHz |
Ethernet Port |
RJ45x3 |
UART Port |
UART(Data)*1；UART(Config)*1 |
Power Input |
7-24VDC |
Power Consumption |
3.5W average |
Dimensions (bare board) |
70x50mm (35g) |
Operating Temperature |
-40 to +40C |
Config |
WEB GUI, TTL |
Download Specs
| dtm_ethernet_radio.pdf |
